Convert DOC to RTF Files

Document Conversion Utility to Convert DOC/DOCX to RTF, TXT, PDF, HTM, XML etc.

English, Deutsch, Français, Italiano, Brazilian-Portuguese, Español, 日本語, Slovak, Other Languages

Need to convert DOC to RTF files? If so we've got a great tool you've never tried, till today. 'Convert Doc' is a simple, yet sophisticated document conversion tool. Convert to and from DOC, RTF, PDF, TXT, HTM etc. This program does not require any other software to be installed for it to work.
Below we discuss how to use the programs user interface and command line interface to specifically convert Word to RTF files. Both methods allow you to automate your conversion needs easily. The user interface has a built in scheduler, and 'Convert Doc's command line (or COM/ActiveX interface) can be used with batch files or your programming language.
NOTE: DOC and RTF conversion is only one of several things this tool can do. To learn more about 'Convert Doc's complete functionality visit the 'Convert Doc' home page.

Convert DOC to RTF files with the User Interface

To convert DOC to RTF using the programs user interface you can follow the directions below.

Convert DOC To RTF File

To convert one or more files follow these steps:

1. Run 'Convert Doc' then select the 'Convert Files' action

2. Select the 'Convert Doc' conversion method (Or the 'MS Word' conversion method) and select your input file. If you are converting a whole folder of DOC files, select the folder and specify all the DOC files within it. For example to convert all the files in the folder "c:\My Files\" set the input file to "c:\My Files\*.DOC". Note the use of the asterisk "*" character which is required when specify a whole folder. Next select the Input File Format (e.g. DOC, TXT, RTF, HTML etc) which in this case is DOC.

3. Specify the output file path and name. If you are doing a whole folder specify the output file with the asterisk "*" in the name. For example "c:\My Output Files\*.RTF" is properly specified. Specify the file type to convert to by choosing the "Convert To File Format" which in this case is RTF (can also be DOC, HTM, TXT, RTF, PDF).

4. Click the CONVERT button on the tool bar to start converting.

See an online video.

Convert RTF to DOC File

To convert one or more files follow these steps:

1. Run 'Convert Doc' then select the 'Convert Files' action

2. Select the 'Convert Doc' conversion method (Or the 'MS Word' conversion method) and select your input file. If you are converting a whole folder of RTF files, select the folder and specify all the RTF files within it. For example to convert all the files in the folder "c:\My Files\" set the input file to "c:\My PDF Files\*.RTF". Note the use of the asterisk "*" character which is required when specify a whole folder. Next select the Input File Format (e.g. DOC, TXT, RTF, HTML etc) which in this case is RTF.

3. Specify the output file path and name. If you are doing a whole folder specify the output file with the asterisk "*" in the name. For example "c:\My Output Files\*.DOC" is properly specified. Specify the file type to convert to by choosing the "Convert To File Format" which in this case is DOC (can also be RTF, HTM, TXT, RTF).

4. Click the CONVERT button on the tool bar to start converting.

Repeating the Use of a 'Conversion Job'

When you click the ADD button, a 'Conversion Item' is added to the 'task list' at the bottom of the user interface. You can add as many 'conversion tasks' as you want, and save the 'Conversion Job' file for use at a later time. See the File menu for saving and restoring 'Conversion Jobs'.

'Convert Doc' can be especially useful if you require complicated file conversion jobs done on a regular basis. By saving and recalling a conversion job file, 'Convert Doc' quickly remembers all the file conversion tasks and their details. Press the F8 key while running 'Convert Doc' to schedule the running of a 'conversion job'.

Note: The same 'conversion job' file discussed above can be specified in the command line by using the /J switch. For example:

ConvertDoc.exe /J"C:\my conversion Jobs\All_PDF.SII"

It is the best file conversion tool you've never used... till today! Click here to download and try it out for free.

Click here for full documentation.

‘Convert Doc’ Command Line

NOTE: 'Convert Doc' can be used simply with the graphical user interface (GUI). If you've never heard of 'Command Line' before, we would recommend not reading this section and instead download and try the software.

'Convert Doc' can be run without a user interface with command line arguments much like in the good old DOS days. Alternatively you can initiate command line execution by going to the operating systems 'command prompt' or within Windows at the START-RUN menu and typing it in there. Lastly, the command line interface can be used from Batch files (files with *.BAT extension).

There are two approaches to doing the command line:

A) Specify a 'Conversion Job' that was built using the graphical user interface (GUI)

B) Specify a 'Conversion Task' in detail

Specifying a 'Conversion Job'

Specifying a 'Conversion Job' is very easy, as you only need to tell 'Convert Doc' where to find the associated *.SII 'Conversion Job' file. All the details associated with this task are executed in one fell swoop. The syntax for specifying a 'Conversion Job' is:

ConvertDoc /J{ConversionJobFile} [/V] [/L{LogFile}] [/B{LogToJobFile}]

Items above enclosed in square brackets “[ ]” are optional, all other ‘switches’ are required. Therefore /J should always be specified on the command line.

Example:

To run the 'Conversion Job' specified by the "C:\MyJobs\ApplesOranges.SII" type the following in at the 'Command Prompt':

ConvertDoc /J"C:\MyJobs\ApplesOranges.SII" /V

The /V switch is used to have 'Convert Doc' report the status of the conversion. It is highly recommended you use the /V switch when you are first developing your command line.

Specifying a 'Conversion Task' To Convert DOC to RTF

Specifying a 'Conversion Task' is a bit more tedious, but does not require the prior creation of a 'Conversion Job' file. However, because the documentation contains a comprehensive list of examples, it should be a simple matter of finding the example that matches your needs, and modifying the paths to the input and output files.

NOTE: This is just a sample from the documentation. If you have trouble running these examples please see Helpful Hints For Creating a Command Line within the documentation. Also, by looking at the documentation, you'll see the full list of options/switches available.

The examples below show conversions from DOC to RTF using the ‘Convert Doc’ conversion method which does not require MS Word and is very fast. Alternatively, you can use the ‘MS Word’ conversion method. To use the ‘MS Word’ conversion method in the examples below:

1. Replace the /M2 switch with /M1 (this switch specifies which conversion method to use)

2. Remove the /F9 switch (Word will detect the input file type)

3. Replace /C5, which specifies the output file type, with /C6

Converting a Single File

To convert a single file, say D:\MyFolder\Doc1.DOC to C:\Results Folder\Doc1.RTF use the following syntax:

ConvertDoc /S "D:\MyFolder\Doc1.DOC" /T "C:\Results Folder\Doc1.RTF" /F9 /C5 /M2 /V

The /S and /T switches above specify Source (input) and Target (output) path respectively and are both required when converting a single file. It is always a good idea to use double quotes around the path especially if there are space characters within the path.
The /M2 switch tells ‘Convert Doc’ to use the ‘Convert Doc’ method (it is one of 3 different possible conversion methods).
/F9 is the input file type, which in this case is a word DOC file. Looking up the file types within the File Type Constants Specification for the ‘Convert Doc’ method will show that the numeric value of 9 corresponds to a DOC file.
/C5 is the output file type, which in this case is a RTF file. Looking up the file types within the File Type Constants Specification for the ‘Convert Doc’ method will show that the numeric value of 5 corresponds to a RTF file.
Finally, the /V (for Verbose) switch is used to give instant feedback by having the program report the status of the conversion with a message box. You can remove this once you have perfected your command line specification. You can also (or instead of /V) create a Log file that will contain the results of the conversion by using the /L switch.

Note: It is highly encouraged that you use the Verbose (/V) switch initially to see what the status of your conversion is and to help you perfect your command line. When in verbose mode the program will tell you what went wrong or right with your command line using message boxes.

Converting a Whole Folder

To convert all the DOC files in the D:\ToDo\ folder to RTF files in the same directory, the following syntax would be used.

ConvertDoc /S"D:\ToDo\*.DOC" /T "D:\ToDo\*.RTF" /F9 /C5 /M2 /V

The /G switch can be used to tell ‘Convert Doc’ to simply place each output file in the same folder as each input file. Therefore the command line above is equivalent to the command line below:

ConvertDoc /S "D:\ToDo\*.DOC" /G /F9 /C5 /M2 /V

Converting a Whole Folder and all Sub-Folders

To extend the previous example (immediately above) to convert all subfolders within D:\ToDo\ simply add the /R switch.

ConvertDoc /S "D:\ToDo\*.DOC" /G /F9 /C5 /M2 /V /R

You may simply want to convert a whole folder and its subfolders and place the output into a separate folder/drive. In which case use this syntax:

ConvertDoc /S"D:\ToDo\*.DOC" /T "C:\Done\*.RTF" /F9 /C5 /M2 /V /R